Precautions For CNC Instrument Lathes

Fang Rong "tooth rolling machine" supply talk about the installation of CNC instrument lathes what are the precautions, when installing CNC instrument lathes, pay attention to prevent the deformation of the guide rail, and keep the foot of the bed and the work surface level.
The main motor has two installation methods: horizontal pulley middle and vertical pulley side: horizontal mounting motor and machine tool in the same plane; The vertical motor is mounted under the machine. The V-belt connecting the spindle to the motor must be adjusted to the right degree of tightness. After a period of use, the machine tool spindle bearing should be properly adjusted to ensure the optimal clearance of the bearing to ensure the use effect of the machine tool and the stability of the product, and improve the service life of the spindle bearing. 　　 　　
CNC instrument lathes generally use spring chuck to clamp the workpiece, and it must be confirmed that there are no hidden dangers that endanger the personal safety of you and other people around you and the safety of the equipment before starting. 　　 　　
The machine is designed for mechatronics and must be trained before operating the machine.

The abnormal noise of the cutting system of the wire cutting machine may appear in the following five parts: 　　 　　
1. At the moment of commutation, the coupling or key, at this time, carefully check the reason, replace the loose and expansive key, so that it can restore a large area of tight cooperation; The coupling should restore the function of the cushion, so that the flexible cushioning is indeed effective, and these parts should not work with disease for a long time, otherwise it will cause irreparable consequences. 　　 　　
2. The sound of foreign matter in the wire cylinder is mostly because small metal particles or molybdenum wire heads enter the wire cylinder, as long as the dynamic balance adjustment nails in the wire cylinder fall off, it can run as usual, and soon the small metal particles or molybdenum wire heads will wear out. 　　 　　3. The abnormal noise of the tooth belt or gear, to check whether the tooth belt or gear is excessively worn, to replace it in time, such as due to improper occlusal gap, it is necessary to adjust its occlusal gap in time. 　　 　　
4. The wire cylinder to the lead screw bears excessive load force caused by friction or impact sound, and the relevant parts will soon be damaged, and the abnormal phenomenon in this part should be stopped to find out carefully until it is eliminated. 　　 　　
5. The fan blade or self-dynamic balance of the wire walking motor.

Know More About Us FangRong Metallurgical Equipment Manufacturer in China since 1999. Professional in Metal Straightening machine, Cold Drawing machine, Push Pointer Drawing Machine, Automatic Three Lines Drawing Machine, Thread rolling machine, Tube-end shrinking machine, Pointing Machine, Core pipe machine, Polishing Machine etc.

Follow US:

Email: frsale@dgfangrong.com

Whatsapp/Skype/Wechat:+8618928290716

Web: www.fangrongmachine.com www.dgfangrong.com